| Assay Method Information | |
| | Electrophysiology Assay |
| Description: | In the alternative, the voltage clamp protocol to examine hNav1.7 currents was as follows. First, the standard current-voltage relationship was tested by pulsing the cell from the holding voltage (Vh) of −120 mV by a series of 5 msec long square-shaped test pulses incrementing in +10 mV steps over the membrane voltage range of −90 mV to +60 mV at the pace of stimulation of 0.5 Hz. This procedure determines the voltage that elicits the maximal current (Vmax). Second, Vh was re-set to −120 mV and a steady-state inactivation (SSIN) curve was taken by the standard double-pulse protocol: 100 ms depolarizing pre-pulse was incremented in steps of +10 mV (voltage range from −90 mV to 0 mV) immediately followed by the 5 ms long test pulse to −10 mV at the pace of stimulation of 0.2 Hz. This procedure determines the voltage of full inactivation (Vfull). Third, the cell was repeatedly stimulated with the following protocol, first in the absence of the test compound then in its presence. The protocol consisted of depolarizing the cell from the holding potential of −120 mV to the Vfull value for 4.5 seconds then repolarizing the cell to the holding potential for 10 ms before applying the test pulse to the Vmax for 5 ms. The amount of inhibition produced by the test compound was determined by comparing the current amplitude elicited by the test pulse in the absence and presence of the compound. |
| Affinity data for this assay | |
|---|---|
| If you find an error in this entry please send us an E-mail | |